36
Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the
VIDEO jack, select Video.
Video
When video input signal is connected to the S-
VIDEO jack, select S-video.
S-video
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point
►
or the SELECT button.
Use the Point ▲▼buttons to select Video and then
press the SELECT button.
S-VIDEO button
Video
S-video
3
Use the Point ▲▼buttons to select Computer 1. And
then
press the Point
►button
to access the submenu
items
. Use the Point ▲▼ buttons to select the S-video
and then press the SELECT button.
or
Computer
1
or
To Next Page
Loading...
Need help?
General