Sanyo PLV-Z5 User Manual

11
Part Names and Functions
IMAGE ADJ.
LIGHT
LAMP
NO
SHOW
FREEZE
MENU
RESET
OK
IMAGE
SCREEN
BRIGHT
BRIGHTNESS
CONTRAST
COLOR
CONT.
LENS IRIS
IRIS
PRESET
USER
IMAGE
COMPONENT
VIDEO
C1/C2
PC
H1/H2
S-VIDEO
INPUT
CXVT
LAMP CONTROL
HDMI
INFO.
ON/STAND-BY
Remote Control
qwe
!5
r LAMP CONTROL button
Select a lamp mode (pp.22, 29).
e LIGHT button
Light up the remote control buttons for about 10 seconds
(p.22).
w NO SHOW button
Temporarily turn off the image on the screen (p.23).
!3 COLOR button
Adjust the color intensity of a projected image (pp.23, 28).
q POWER ON/STAND-BY button
Turn the projector on or off (pp.18, 19).
!0
r
!4
u
!6
t
o
!2
!7
y
i
i BRIGHTNESS button
Adjust the brightness of a projected image (pp.23, 28).
!3
t MENU button
Open or close the On-Screen Menu (p.20).
y POINT ed7 8 buttons
Select an item or adjust the setting values in the On-Screen
Menu, or use them to pan the image in the Normal through
mode (p.35).
u SCREEN button
Select a screen size (pp.23, 34
).
o LENS IRIS button
Adjust the lens iris (pp.23, 29).
!0 INPUT buttons
Select an input source (p.24
).
!2 IMAGE buttons
Select an image level (pp.23, 27).
!4 CONTRAST button
Adjust the contrast of a projected image (pp.23, 28).
!5 IMAGE ADJ. button
Display the Image adj. Menu items one at a time and directly
adjust its image level (pp.23, 28).
!6 OK button
Execute the selected item or access the sub-menu items
(p.20).
!7 RESET button
Reset to the previous figure.
This function is limited to when selecting the Image
Adjustment (pp.28 – 31), Picture Adjustment (p.33) and the
Keystone function in the Setting (p.36).
!8
!8 FREEZE button
Freeze the picture on the screen (p.22).
!1 INFO. button
Display the input source information (p.41).
!1
To ensure safe operation, observe the following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemicals.

Sanyo PLV-Z5 Specifications

General

Number of colors	1.073 billion colors
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	40 - 300 \
Projector native resolution	1280x720
Keystone correction, vertical	± 20 °
Digital zoom	2 x
Zoom capability	Yes
Focal length range	21.3 - 42.6 mm
RS-232 ports	1
Compatibility	WXGA/SXGA/XGA/SVGA/VGA/MAC
Dimensions (WxDxH)	382 x 304.3 x 126.8 mm
Power requirements	100 - 240 V
Horizontal resolution	420 lines
Lamp type	UHP
Lamp power	145 W
Light source type	Lamp
Service life of light source	3000 h
Dot clock scanning frequency	100 MHz
Serial interface type	RS-232
Display diagonal	0.7 \
Power consumption (typical)	185 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	5000 g