Sanyo PLV-Z5 User Manual

24
Input Source and System Selection
Press the INPUT button on the top control or the INPUT buttons
on the remote control (see below) to choose an input source.
Top Control
INPUT button
Press the VIDEO, S-VIDEO, C1/C2, H1/H2, or PC buttons on the
remote control according to the input source.
COMPONENT
VIDEO
C1/C2
PC
H1/H2
S-VIDEO
INPUT
CXVT
HDMI
INFO.
Remote Control
INPUT buttons on the remote control
INPUT buttons
When the video signal is connected to the VIDEO
jack, press VIDEO.
VIDEO
When the video signal is connected to the S-VIDEO
jack, press S-VIDEO.
S-VIDEO
When the video signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, press C1/C2.
Component 1 ➜ Component 2 ➜ Component 1 ➜
• • • •
C1/C2
When the video signal is connected to the HDMI
terminal, press H1/H2.
HDMI 1 ➜ HDMI 2 ➜ HDMI 1 ➜
• • • •
H1/H2
INPUT button
Video
S-video
PC When the computer signal is connected to the
COMPUTER connector, press PC.
Component 1
Component 2
HDMI 1
HDMI 2
✔Note:
• Before selecting an input source with these buttons, each input must be set on a
proper signal form via menu operation (see on pages 25 – 26).
Input
Computer
✔Note:
• When switching from HDMI1 to HDMI2 or vice versa, the signal may be interrupted
for a moment depending on the equipment.

Sanyo PLV-Z5 Specifications

General

Number of colors	1.073 billion colors
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	40 - 300 \
Projector native resolution	1280x720
Keystone correction, vertical	± 20 °
Digital zoom	2 x
Zoom capability	Yes
Focal length range	21.3 - 42.6 mm
RS-232 ports	1
Compatibility	WXGA/SXGA/XGA/SVGA/VGA/MAC
Dimensions (WxDxH)	382 x 304.3 x 126.8 mm
Power requirements	100 - 240 V
Horizontal resolution	420 lines
Lamp type	UHP
Lamp power	145 W
Light source type	Lamp
Service life of light source	3000 h
Dot clock scanning frequency	100 MHz
Serial interface type	RS-232
Display diagonal	0.7 \
Power consumption (typical)	185 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	5000 g