Sanyo SCP-2300 User Manual

Setting an Alert Notification for Ready Link Calls
Your phone can alert you with an audible tone when you receive a
Ready Link call.
To set alerts for Ready Link calls:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Ready Link and press .
4. Select Sounds and press .
5. Select Alerts and press .
6. Select Ready Link Calls or R-Link Missed and press .
7. Use the navigation key to select Once, Repeat Alert for Ready
Link Calls or Once, Repeat Alert, or Off for R-Link Missed.
8. Press to save the setting.
Tip:You can set alerts in another way (see “Alert Notification” on page 44).
Setting the Speakerphone for Ready Link Calls
You can set the speakerphone on or off when a Ready Link call is
activated. By default, the speakerphone is set to on.
To set the speakerphone on or off:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Ready Link and press .
4. Select Speakerphone and press .
5. Select On or Off and press .
Note:If the phone’s ringer volume is set to Vibrate, Ringer off, or Silence All, the
speakerphone turns off. Press to turn the speakerphone mode on.
Section 2J: Using Ready Link 141

Sanyo SCP-2300 Specifications

General

Brand	Sanyo
Model	SCP-2300
Category	Cell Phone
Language	English