Sanyo SCP-2300 User Manual

Accessing the Security Menu
All of your phone’s security settings are available through the
Security menu. You must enter your lock code to view the
Security menu.
To access the Security menu:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Security and press .
4. Enter your lock code. (The Security menu is displayed.)
Tip:If you can’t recall your lock code, try using the last four digits of your wireless
phone number or try 0000. If neither of these work, call Qwest Wireless
TM
Repair at
1-888-879-0611.
Using Your Phone’s Lock Features
Locking Your Phone
When your phone is locked, you can only receive incoming calls or
make calls to 911 or special numbers.
To lock your phone:
1. From the Security menu (see “Accessing the Security Menu”
above), select Lock Phone and press .
2. Select Lock Now or On Power-up and press .
3. Depending on your preference, highlight either Full Lock or
Excp. Incom.Calls and press .
䡲
Full Lock: No phone calls can be made and only special
numbers can be received. (You can still make a call to
Emergency numbers and special numbers.)
䡲
Excp. Incom.Calls: No phone calls can be made, however all
incoming calls can be received. (You can still make a call to
Emergency numbers and special numbers.)
Tip:If you want to cancel the “On Power-up” setting before turning the phone off,
select Unlocked during step 2 above.
Section 2C: Setting Your Phone’s Security 65

Sanyo SCP-2300 Specifications

General

Brand	Sanyo
Model	SCP-2300
Category	Cell Phone
Language	English