Sanyo SCP-2300 User Manual

Setting Headset Mode
This feature allows you hands-free phone use. Set the headset mode
to Voice Call and press the Turbo Button (the operation button) on
the headset to activate useful functions.
To connect the headset:
䊳
Simply plug the headset into your phone’s headset jack.
To set headset mode:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Others and press .
4. Select Headset Mode and press .
5. Select an option and press :
䡲
Voice Call: Press the Turbo Button to activate Voice Dial.
Press twice to redial the last call. Press and hold to record a
Voice Memo.
䡲
Ready Link: Press and hold the Turbo Button to redial the last
Ready Link call.
䡲
Off: Select Off if you do not wish to assign a Turbo Button
setting or if your headset does not have a Turbo Button.
Tip:For an explanation of the Headset Mode setting, press Info (right softkey)
during step 5 above.
Note:When using the headset, DO NOT set the volume too high. Listening at high
volume for an extensive period of time may cause hearing loss.
Setting Message Notification
You can see an icon or an icon and pop-up message notification when
you receive a text message or voicemail.
To set message notification:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Messaging and press .
4. Select Notification and press .
5. Select Msgs and Icon or Icon Only and press .
Section 2B: Controlling Your Phone’s Settings 61

Sanyo SCP-2300 Specifications

General

Brand	Sanyo
Model	SCP-2300
Category	Cell Phone
Language	English