Sanyo SCP-2300 User Manual

Assigning Downloaded Ringers
You can assign downloaded ringers directly from the Downloads
menu or through your phone’s Settings menu.
To assign a downloaded ringer from the Downloads menu:
1. Press to access the main menu.
2. Select Downloads and press .
3. Highlight Ringers and press .
4. Highlight a downloaded ringer and press Options (right softkey).
5. Highlight Set as and press .
6. Highlight Voice Calls, Voicemail, Messaging, Calendar/Alarm,
Start-up Tone, Power-off Tone, Phone Book, or Ready Link Calls, and
press .
The following two items need an extra step:
䡲
Voice Calls requires you to highlight With Caller ID or
No caller ID and press .
䡲
Phone Book requires you to highlight the Contacts entry you
want to assign and press .
(A message appears confirming that the ringer has been assigned.)
To assign a downloaded ringer from the Settings menu:
䊳
Please see one of the following:
䡲
“Selecting Ringer Types for Voice Calls” on page 39.
䡲
“Selecting Ringer Types for Ready Link Calls” on page 40.
䡲
“Selecting Ringer Types for Voicemail, Messaging, or
Calendar/Alarm” on page 40.
䡲
“Setting a Start-up/Power-off Tone” on page 41.
䡲
“Selecting a Ringer for an Entry” on page 92.
Note:You may assign a ringer to more than one type of call.
Purchasing Ringers
You can purchase ringers directly from your phone by following the
instructions on page 179 or through
www.qwestwireless.com.
Section 3B: Sprint PCS Vision 180

Sanyo SCP-2300 Specifications

General

Brand	Sanyo
Model	SCP-2300
Category	Cell Phone
Language	English