40
Important notes before first use, installation and maintenance
Before use, carefully read the manual not only for the thermostat, but also for the Heating device (heat pump,
pumps, boilers, etc.) • Turn off the power supply before installing the thermostat! • We recommend that the
installation is done by a qualified electrician • the electrical circuit must be secured with a fuse that does not
exceed the current load of wiring • Please note all safety instructions before installing • Do not expose the
product to direct sunlight, extreme cold, humidity and sudden temperature changes. This would reduce the
accuracy of the temperature measurement • Do not place the product in places that are prone to vibrations
and shocks - this can cause damage • Do not expose the product to excessive pressure, shock, dust, high
temperatures or moisture, as these can cause damage to one of the functions product, shorter energy
endurance, damage to batteries, and deformation of plastic parts. • Do not expose the product to rain or
moisture, dripping or spraying water. • Do not place any sources of fire on the product, for example, spark
plugs etc. • Do not place the product in places where there is insufficient air circulation. • Do not insert any
objects into the ventilation openings. • Do not interfere with the internal electrical wiring of the product. It may
be damaged and therefore terminate the warranty. The product must only be repaired by a trained specialist.
• Use a moderately moistened cloth for cleaning. Do not use solutions or cleaning products - may damage
plastic parts and electrical wiring • Do not immerse the product in water or other liquids. • Do not repair it
yourself if the product is damaged or defective. Put it in the repair shop where you bought it • The product
should not be used by a person (including children) by physical, sensory or mental disability or lack of
experience and knowledge impeded by the safe use of the device if they are not controlled, or if they were not
informed by the person responsible for their safety about the use of the device • Children's control is necessary
to ensure that they do not play with the device. Declaration of conformity has been issued for the product. The
device can be freely used in the EU. This and other documentation (RoHS, CE, …) is freely available on the
website www.sen-controls.eu
and or subsites e.g. en.sen-controls.eu under tab “Pravno”, “Dokumenti “Legal,
Documents” or similar at each published product or by demand via info@sen-controls.eu. Manufacturer of this
product is SASWELL CONTROLS (HONGKONG) LTD. Importer, distributor and service for Saswell is Sen
Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia
To Next Page
Loading...
Need help?
General
