21
www.schaerer.com
User Manual SCF - EN
03.2010 / Edition 07
Software
Timer state
Touch the pad
Activate / deactivate timer = On / Off.
Set timer
Touch the pad
Program the switch on and switch off times.
Touch the
pad
The operating time display appears. Here the day, time,
and desired operation are set.
Set day (Day)
1 = Monday y
2 = Tuesday, etc. up to 7 = Sunday y
1-5 = Monday to Friday (weekdays) y
1-7 = entire week (Monday to Sunday) y
Set the time (hours, minutes)
Set the desired switching time (action)
Switch on time y =
I
(on display)
Switch off time y =
O
(on display)
Conrm with
or
Delete with
Display programmed switching times
Touch the pad
Programmed switch times are displayed here.
Up to 16 switch times (events) per day are possible.
Programmed times are listed chronologically.
Any new switch time is sorted chronologically
immediately upon input and conrmation with
.
Touch on the
pad directly accesses the timer
overview.
When the timer is activated,
the timer symbol, a little clock,
appears on the display.
Example:
In day 1-5 or day 1-7, the
switching times are copied to
the indicated days.
Select desired settings with
the pads
and .
Current selection is inversely
displayed.