24
www.schaerer.com
User Manual SCF - EN
03.2010 / Edition 07
Software
Cleaning program
Touch the pad
The daily cleaning program starts.
The program automatically executes foamer cleaning
if milk beverages have been dispensed. Mixer rinsing
follows for the Schaerer Coffee Factory with mixer
system.
The cleaning program sequence is described in cleaning
instruction.
Prior to carrying out cleaning, please note the safety
instructions in the safety chapter. Read the cleaning
instruction and the Care chapter, starting on page 38.
Foamer cleaning
Touch the pad
Milk foamer cleaning begins.
Optional Plug&Clean cleaning.
Foamer cleaning is carried out automatically as an
integral part of the full cleaning mode.
Mixer rinsing
Touch the pad
Mixer rinsing begins.
Mixer rinsing is performed automatically by the
cleaning program when a mixer system is installed.
Follow the manual.
Observe the Safety
chapter.
Plug&Clean Cleaning
w Care
page 40
Hot liquids in the
dispensing area.
Observe the Safety
chapter.
Hot liquids in the
dispensing area.
Observe the Safety
chapter.