THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
12
Weight: 56 Kg
Hydraulic Connection
Seawater inlet: ¾’’ fitting, 20mm internal diameter reinforced hose.
Exhaust: ½’’ fitting, 16mm internal diameter reinforced hose.
Fresh water: ¼’’ fitting, 6x8mm hose.
PUMP GROUP
Dimensions
Length: 42 cm
Width: 15 cm
Height: 23 cm
Weight: 13 Kg
Hydraulic Connection
Water inlet: ¾’’ fitting, 20mm internal diameter reinforced hose.
Water outlet: ¾’’ fitting, 20mm internal diameter reinforced hose.
Feed pump type: Rotary vane pump
Motor type: 4 poles 230 VAC single phase IP 55 0,75 Kw
Filters: n. 1 Cartridge filter 5 microns 2.32" x 9 ¾’’
n. 1 Active carbon filter 2.32" x 9 ¾’’
Motor power supply: 230 VAC 50Hz (150M230 version)
Computer power supply: 24 VDC +/- 15%
Average electric consumption: 600 Watt/h average
Peak electric consumption: 1.2 kWatt
Nominal fresh water production: 150 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
CEE conformity: In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.6 Features of the product
The water produced by a Schenker plant, produced from clean seawater has a high purity, but the potability
may not be guaranteed as bacterium may be present in the watermaker, caused by non-observance of
shutdown and cleaning procedures. It is essential that correct shut down and storage procedures are followed
to ensure continued purity of the product water. UV treatment of the product water may be beneficial.
To Next Page
Loading...
Need help?
General
