Schenker MODULAR 150 Installation, Use & Maintenance Manual

5 – FUNCTIONING AND USE COD.150M230.T.2021
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
37
5.3.2 Start-up
1. Open the depressurization valve.
2. Push for 20-30 sec the red button on the active
carbon filter housing cup in order to purge the
air from the system.
3. Activate the start-up procedure through the
function of the second page.
4. Close the depressurization valve when the
display shows the specific message and wait
for the completion of the procedure.
The procedure lasts about 3 minutes, and it can be stopped at any time pushing STOP. After completed the
procedure the system is ready to start normally.

Schenker MODULAR 150 Specifications

General

Brand	Schenker
Model	MODULAR 150
Category	Water Filtration Systems
Language	English