To Next PageTo Next PageTo Previous PageTo Previous Page
Why does the motor of my Scheppach HBS30 Saw start slowly and not reach operating speed?
If your Scheppach Saw's motor starts slowly and doesn't reach operating speed, the voltage may be too low, the coils may be damaged or the capacitor burnt. Contact the utility provider to check the voltage. Arrange for inspection of the motor by a specialist. Arrange for replacement of the capacitor by a specialist.
What to do if my Scheppach Saw motor does not work?
If the Scheppach Saw motor isn't working, the motor, cable, or plug might be defective, the fuses might be burnt, or the housing cover might be open (limit switch). Check the fuses and replace them if necessary. Ensure the housing cover is closed exactly. Arrange for inspection of the machine by a specialist if the problem persists. Never repair the motor yourself due to the danger.
How to fix a rough or wavy saw cut with my Scheppach HBS30?
If your Scheppach Saw cut is rough or wavy, it could be due to a dull saw blade or a tooth shape that's not appropriate for the material thickness. Try resharpening the saw blade or using a more suitable saw blade.
Why doesn't my Scheppach HBS30 Saw motor reach full power?
The Scheppach Saw motor may not reach its full power if the circuits in the network are overloaded by other equipment like lamps or other motors. Avoid using other equipment or motors on the same circuit to ensure the saw motor receives adequate power.
What to do if Scheppach HBS30 blade jams during cutting?
If the Scheppach Saw blade jams during cutting, it could be due to a blunt saw blade, deposits on the saw blade, or a poorly set guide. Try changing the saw blade, cleaning the saw blade, and setting the saw blade guide according to the operating instructions.
Why doesn't my Scheppach Saw motor reach its full power?
If the motor of your Scheppach Saw does not reach its full power, it might be because the circuits in the network are loaded with other equipment like lamps or other motors. Try not using any other equipment or motors on the same circuit.
How to fix if Scheppach HBS30 blade is not running straight?
If the saw blade of your Scheppach Saw isn't running straight, it could be due to a wrongly set guide or the wrong saw blade. Set the saw blade guide according to the operating instructions and select a saw blade according to the operating instructions.
Why does the Scheppach HBS30 motor start slowly and not reach operating speed?
If your Scheppach Saw motor starts slowly and doesn't reach operating speed, it could be due to voltage being too low, damaged coils, or a burnt capacitor. Contact the utility provider to check the voltage. Arrange for inspection of the motor by a specialist. Arrange for replacement of the capacitor by a specialist.
Why Scheppach HBS30 motor does not reach its full power?
If your Scheppach Saw motor isn't reaching its full power, it could be due to loaded circuits in the network (lamps, other motors, etc.). Avoid using other equipment or motors on the same circuit.
How to fix Scheppach HBS30 Saw blade that is not running straight?
If the Scheppach Saw blade is not running straight, it could be because the guide has been wrongly set or the wrong saw blade is being used. Set the saw blade guide according to the operating instructions. Select a saw blade according to the operating instructions.
General| Product type | Vertical band saw |
|---|---|
| Product color | Blue, Grey |
| Built-in light | - |
| Adjustable speed | Yes |
| Housing material | Steel, Aluminium |
| Table bevel angle | 0 - 45 ° |
| Input power | 350 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Cutting width | - mm |
| Cutting height @ 90° | 80 mm |
| Number of teeth per inch (TPI) | 6, 10, 15 |
Weight and Dimensions| Depth | 730 mm |
|---|---|
| Width | 420 mm |
| Height | 540 mm |
| Weight | 20500 g |
| Table depth | 520 mm |
| Table width | 300 mm |
Key safety measures for operating and maintaining the electric tool.
Lists potential risks and remaining hazards associated with the machine's use.
Lists the necessary tools for assembly and setup.
Step-by-step guide for attaching the saw table to the machine.
Instructions for attaching the table extension for wider workpieces.
Guide on how to attach and adjust the parallel fence for precise cuts.
Steps for aligning the saw band on the band wheels for optimal cutting.
How to set the upper and lower saw band guides for proper blade support.
Setting the upper saw band guide pins for blade alignment.
Tilting the saw table to achieve a precise 90-degree angle.
Guidance on selecting the appropriate saw band for different cuts.
Detailed steps for safely removing and installing a new saw band.
Instructions for operating the machine's power switch.
How to perform angled cuts by tilting the saw bench.
Step-by-step guide for cutting wood along its length.
Techniques for cutting curves and radii without guides.
