www.scheppach.com
GB
|
29
- Do not use the electric tool for purposes for
which it is not intended. For example, do not use
handheld circular saws for the cutting of branch-
es or logs.
-
8. Wear suitable clothing
-
become entangled in moving parts.
- When working outdoors, anti-slip footwear is
recommended.
- Tie long hair back in a hair net.
9. Use protective equipment
- Wear protective goggles.
-
work.
10.
processing wood, materials similar to wood, or
plastics.
- If connections for dust extraction and a collect-
- When processing wood, materials similar to
wood, and plastics. Operation in enclosed spac-
11. Do not use the cable for purposes for which it is
not intended
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
12. Secure the workpiece
- Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held
- -
pieces (table, trestle, etc.) in order to prevent the
machine from tipping over.
-
working plate and stop in order to prevent bounc-
ing and twisting of the workpiece.
13. Avoid abnormal posture
- -
- Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
14.
- Keep cutting tools sharp and clean in order to be
- Follow the instructions for lubrication and for tool
replacement.
• -
pieces.
•
• Kickback
• Tilting of the workpiece due to inadequate support.
• Touching the blade.
• Catapulting of pieces of timber and workpieces.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
commercial, trade or industrial businesses or for equiv-
alent purposes.
5. Safety information
m ATTENTION!
must be observed when using electric tools for protec-
Safe work
1.
- Disorder in the work area can lead to accidents.
2.
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet envi-
ronment.
- Make sure that the work area is well-illuminated.
- Do not use electric tools where there is a risk of
3.
-
pipes, radiators, electric ranges, cooling units).
4.
-
touch the electric tool or its cable. Keep them
clear of the work area.
5.
-
elevated or closed location out of the reach of
children.
6.
-
output range.
7. Use the correct electric tool
-
work.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
