To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Why does my Scheppach HBS30 Saw motor overheat?
The Scheppach Saw motor might overheat easily due to overloading or insufficient cooling. To resolve this, avoid overloading the motor while cutting and remove dust from the motor to ensure optimal cooling.
What to do if my Scheppach Saw motor does not work?
If the Scheppach Saw motor isn't working, the motor, cable, or plug might be defective, the fuses might be burnt, or the housing cover might be open (limit switch). Check the fuses and replace them if necessary. Ensure the housing cover is closed exactly. Arrange for inspection of the machine by a specialist if the problem persists. Never repair the motor yourself due to the danger.
How to fix a rough or wavy saw cut with my Scheppach HBS30?
General| Product type | Vertical band saw |
|---|---|
| Product color | Blue, Grey |
| Built-in light | - |
| Adjustable speed | Yes |
| Housing material | Steel, Aluminium |
| Table bevel angle | 0 - 45 ° |
| Input power | 350 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Cutting width | - mm |
| Cutting height @ 90° | 80 mm |
| Number of teeth per inch (TPI) | 6, 10, 15 |
Weight and Dimensions| Depth | 730 mm |
|---|---|
| Width | 420 mm |
| Height | 540 mm |
| Weight | 20500 g |
| Table depth | 520 mm |
| Table width | 300 mm |
Key safety measures for operating and maintaining the electric tool.
Lists potential risks and remaining hazards associated with the machine's use.
Lists the necessary tools for assembly and setup.
Step-by-step guide for attaching the saw table to the machine.
Instructions for attaching the table extension for wider workpieces.
Guide on how to attach and adjust the parallel fence for precise cuts.
Steps for aligning the saw band on the band wheels for optimal cutting.
How to set the upper and lower saw band guides for proper blade support.
Setting the upper saw band guide pins for blade alignment.
Tilting the saw table to achieve a precise 90-degree angle.
Guidance on selecting the appropriate saw band for different cuts.
Detailed steps for safely removing and installing a new saw band.
Instructions for operating the machine's power switch.
How to perform angled cuts by tilting the saw bench.
Step-by-step guide for cutting wood along its length.
Techniques for cutting curves and radii without guides.
