Scheppach HMS1080 User Manual

www.scheppach.com
26
|
GB
Never let children work with the appliance. Never let
adults work with the appliance unless they have been
properly trained.
The operating sta󰀨 must carefully read the Operating
Instructions before using the appliance.
Qualication: Apart from the detailed instructions by
a professional, no special qualication is necessary for
appliance using.
Minimum age: Persons over 18 years of age can only
work on the appliance. An exception includes young-
sters trained in order to reach knowledge under super-
vision of the trainer during occupational education.
Local regulations may stipulate the minimum age of
the user.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be
liable for any damage or injuries of any kind caused as
a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equiv-
alent purposes.
5. Safety information
General Safety Instructions
WARNING! When using electric tools basic safety
precautions should always be followed to reduce the
risk of re, electric shock and personal injury includ-
ing the following.
Read all these instructions before attempting to oper-
ate this product and save these instructions.
Safe operation
1. Keep work area clear
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet locations.
- Keep work area weil lit.
3. Scope of delivery
• Operating manual
• 4x Hexagon socket screw M8
• 4x Washer
• 2x Hexagon socket screw
• Allen key 4mm
• Allen key 5mm
• Allen key 6mm
• Push stick
• 2x Push block
• Blade adjustment block
• Chip extraction
• Chip extraction extension
• Parallel fence
• Planing blade cover
• Swivel arm for planing blade cover
• Star grip screw with washer M6
• Crank handle
• 4x Rubber feet
4. Intended use
The surfacing and thicknessing plane is designed for
the surfacing and thicknessing of all types of whole
pieces of square, rectangular or chamfered converted
timber.
The machine is to be used only for its prescribed
purpose.
m WARNING!
The following work must not be carried out:
• Insert work (in other words any work which does not
extend over the full length of the workpiece)
• Recesses, tenons or cut-outs
• Planing highly warped timber in which there is inad-
equate contact with the feed bench.
m The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in con-
ict with the designation and it is prohibited to attach
any protective equipment of other manufacturers.
The bridge guard must not be removed during ma-
chining. The unused part of the blade shaft must be
covered.
Requirements for operating sta󰀨
The appliance may only be operated and maintained
by persons familiarised with it and informed about pos-
sible risks.

Scheppach HMS1080 Specifications

General

Brand	Scheppach
Model	HMS1080
Category	Planer
Language	English