Scheppach HP2200S User Manual

www.scheppach.com
26
|
GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. A - Y)
1. Throttle
2. Handle
3. Lifting point
4. Motor
5. Exciter
6. Base plate
7. Filler port for exciter oil
8. Spark plug
9. Mu󰀪er
10. Choke lever
11. Fuel valve
12. Fuel tank and cover
13. Throttle
14. Recoil starter
15. Air lter
16. Oil dipstick
17. Engineswitch
18. Carburettor
19. Belt Guard
20. Drain plug for exciter oil
3. Technical data
Motor / Engine
1-cylinder-4-stroke for
unleaded gasoline
Displacement 196 cm³
Motor power max. 4.8 kW
Tank volume 3.5 l
Motoroil volume max. 0.6l
Exciter oil volume 0,25 l
Working plate size (LxW) aprox. 550 x 440mm
Compaction pressure 25 kN
Travel Speed 25 m/min
Vibration strokes 4200 vpm
Compaction Depth 35 cm
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer
We hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specied.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profession-
ally and economically, how to avoid danger, costly re-
pairs, reduce downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with

Scheppach HP2200S Specifications

General

Product type	Vibratory plate
Travel speed	25 m/min
Plate material	Steel
Compaction depth	35 cm
Compaction force	25000 N
Fuel tank capacity	3.5 L
Engine displacement	196 cm³
Engine power	6.5 hp
Power source type	Gasoline

Weight and Dimensions

Depth	1025 mm
Width	440 mm
Height	930 mm
Weight	102000 g
Plate depth	550 mm