www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
21
The operating instructions must always be
near the machine. Put them in a plastic fold-
er to protect them from dirt and humidity.
They must be read by every operator before
beginning work and observed conscien-
tiously. Only persons who have been trained
in the use of the machine and have been
informed of the various dangers may work
with the machine. The required minimum
age must be observed.
In addition to the safety requirements in
these operating instructions and your coun-
try’s applicable regulations, you should ob-
serve the generally recognized technical
rules concerning the operation of identically
constructed devices.
We accept no liability for accidents or dam-
age that occur due to a failure to observe
this manual and the safety instructions.
2. Device description (Fig. 1 - 2)
1. Tank full indicator
2. Frame
3. Tank
4. Transport handle
5. Earthing screw
6. Socket - 230V (2x)
7. Oil ller tube
8. Circuit breaker
9. Oil drain plug
10. Voltmeter
11. Connection - 12V
12. On / O Switch
13. Transport wheels
14. Reversing starter
15. Motor
16. Fuel tap
17. Air lter
18. Choke
19. Tank cap
3. Scope of delivery
A. Transport wheels
B. Support foot
C. Adapter - 230V (2x)
D. Operating manual
E. Spark plug wrench
1. Introduction
Manufacturer:
scheppach
Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success
using your new machine.
Note:
According to the applicable product liability
laws, the manufacturer of the device does
not assume liability for damages to the prod-
uct or damages caused by the product that
occurs due to:
• improper handling,
• noncompliance of the operating instruc-
tions,
• repairs by third parties, not by authorized
service technicians,
• installation and replacement of non-origi-
nal spare parts,
• non-intended use,
• Failure of the electrical system in the event
of the electrical regulations and VDE pro-
visions 0100, DIN 571 13 / VDE 01 13 not
being observed.
We recommend:
That you read through the entire operating
instructions before putting the machine into
operation.
These operating instructions are to assist
you in getting to know your machine and uti-
lize its proper applications.
The operating instructions contain important
notes on how you work with the machine
safely, expertly, and economically, and how
you can avoid hazards, save repair costs,
reduce downtime and increase the reliability
and service life of the machine.
In addition to the safety requirements con-
tained in these operating instructions, you
must be careful to observe your country’s
applicable regulations.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
