www.scheppach.com
GB
|
27
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 14)
1. Carrying handle
2. Tank cover
3. Engine cover
4. Spark plug cover
5. Pull starter
6. Operating display
7. Overload indicator
8. Oil warning indicator
9. USB - connection (2x)
10. Energy-saving switch (ECO)
11. On/o switch with choke
12. “RESET” button
13. 230 V~ socket (2x)
14. 12 V DC connection
15. 12V DC safety trigger
16. Earthing screw
17. Funnel
18. Spark plug wrench
19. 12V cable
20. Oil dipstick
21. Air lter cover
22. Air lter
23. Spark plug
24. Spark plug connector
25. Fuel lter insert
26. Fill level marking
3. Scope of delivery (Fig. 4)
• Power generator/inverter
• Funnel (17)
• Spark plug wrench (18)
• 12 V cable (19)
• Operating manual
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specied.
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE 0113 not being observed.
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
To Next Page
Loading...
Need help?
General
