27
Sharp 42" LED TV
www.sharpusa.com
Connecting a computer
Using VGA (most common)
To connect a computer using VGA:
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the PC IN jack on the back of your TV and to the VGA jack on the
computer.
3 Connect an audio cable with a stereo mini plug (not provided) to the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT (headphone) jack on the computer.
4 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to select PC, then press ENTER.
7 Adjust the display properties on the computer, if necessary.
Audio cable
with stereo
mini plug
VGA cable
Back of TV
VGA cable
connector
Audio cable
with stereo
mini plug
PC IN jack PC/DVI
AUDIO IN
jack
On your TV
To Next Page
Loading...
Need help?
General