33
Sharp 42" LED TV
www.sharpusa.com
Using analog audio
When you connect a home theater system or sound bar to the /AUDIO OUT jack, the TV speakers are muted.
To connect a home theater system or sound bar using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a 3.5mm audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
Notes
• For information about selecting the audio out mode for a home theater
or sound bar, see the Headphones/Audio Out option in “Adjusting
sound settings” on page 44.
• You can connect headphones to the /AUDIO OUT jack. If you want to
use headphones, you need to disconnect the amplifier, home theater
system, or sound bar.
3.5mm audio cable
Home theater
system
Side of TV
3.5mm audio
cable connector
/AUDIO OUT
jack
On your TV
To Next Page
Loading...
Need help?
General