32
LC-42LB150U Sharp 42" LED TV
www.sharpusa.com
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system or sound bar using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL AUDIO OUTPUT jack on the back of your TV
and to the optical AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio OUT option on the SOUND menu to PCM. See “Adjusting sound settings” on
page 44.
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
Home theater
system
Digital optical audio cable
Back of TV
To Next Page
Loading...
Need help?
General