59
Sharp 42" LED TV
www.sharpusa.com
Labeling an input source
You can add a label to an input source to make it
easier to identify in the INPUT SOURCE list.
To label an input source:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETUP, then press T or
ENTER. The SETUP menu opens.
3 Press
S or T to highlight Input Labels, then
press ENTER. The SETUP · INPUT LABELS screen
opens with the input source field highlighted.
4 Press
S or T to select the input source you want
to label, then press X to move to the label field.
5 Press
S or T to select a character, then press
W or X to move to the previous or next character
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press
ENTER to save your label and return to the
previous menu. The next time you press INPUT,
your label appears in the INPUT SOURCE list.
7 Press EXIT to close the menu.
Using CEC Control
CEC Control lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use CEC Control, you must set the CEC Control
setting on the SETUP · CEC menu to On.
Turning CEC Control on or off
To turn CEC Control on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETUP, then press T or
ENTER. The SETUP menu opens.
3 Press
S or T to highlight CEC, then press
ENTER. The SETUP · CEC menu opens.
4 Press
S or T to highlight CEC Control, then
press ENTER.
5 Press
S or T to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your
TV.
• The connected device’s HDMI CEC
feature must be turned on.
• If you connect an HDMI device that is
not HDMI CEC-compatible, all of the
CEC features do not work.
• Depending on the connected HDMI
device, the CEC feature may not work.
To Next Page
Loading...
Need help?
General