41
Sharp 42" LED TV
www.sharpusa.com
Selecting a channel
To select a channel:
• Press CH or CH to go to the next or previous
channel on the memorized channel list.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change
the channel.
• To select a digital sub-channel, press the number
buttons to enter the main digital channel, press
(sub-channel), then press the number button
for the sub-channel. Wait for the channel to
change, or press ENTER to immediately change
the channel. For example, to tune to channel 5.1,
press 5, (sub-channel), then 1.
• Press FLASHBACK to go to the last viewed
channel.
• Press FAVORITE to open the favorite channel list,
press
S or T to highlight a channel, then press
ENTER. For information about setting up a
favorite channel list, see “Setting up a favorite
channel list” on page 48.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press
MUTE to turn off the sound.
Press
MUTE again to turn the sound back on.
Viewing channel information
To view channel information:
• Press INFO
*
to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, current
time, signal strength, day of the week, date
and current program start and end times, if
provided by the broadcaster.
• Analog channel information—Displays
channel number, channel label, signal type,
audio information, day of the week, date, and
resolution, if provided by the broadcaster.
Note
Button presses must be within three
seconds of each other.
Note
If a list has more than one page, press
S or
T to scroll through the pages.
To Next Page
Loading...
Need help?
General