Shure ANI4IN User Manual

Shure Incorporated
26/27
Input Clipping Level
Analog Gain Setting= +0dB +20 dBV
Analog Gain Setting= +27dB -7 dBV
Analog Gain Setting= +51dB -31 dBV
Built-in Digital Signal Processing
Per Channel Equalizer (4-band Parametric), Mute, Invert Polarity, Gain (140 dB range)
System Audio Summing
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
IP Ports and Protocols
Shure Control
Port TCP/UDP Protocol Description
FactoryDe
fault
21 tcp FTP Required for firmware updates (otherwise closed) Closed
22 tcp SSH Secure Shell Interface Closed
23 tcp Telnet Not supported Closed
68 udp DHCP Dynamic Host Configuration Protocol Open
80* tcp HTTP Required to launch embedded web server Open
443 tcp HTTPS Not supported Closed
161 tcp SNMP Not supported Closed
162 tcp SNMP Not supported Closed
2202 tcp ASCII Required for 3rd party control strings Open
5353 udp mDNS Required for device discovery Open
5568 udp SDT Required for inter-device communication Open
8023 tcp Telnet Debug console interface Closed
8180 tcp HTML Required for web application Open
8427 udp Multcast SLP Required for inter-device communication Open
64000 tcp Telnet Required for Shure firmware update Open
†
†
†

Shure ANI4IN Specifications

General

Brand	Shure
Model	ANI4IN
Category	Accessories
Language	English