Siemens 3VA1 100 A User Manual

Accessories
4.4 Plug-in and draw-out technology
3VA molded case circuit breakers
206 Manual, 04/2015, A5E03603177010-02
4.4.3
General information
With plug-in and draw-out circuit breakers, the cables or busbars are connected to the plug-
in socket or the draw-out socket. The same socket unit is used for the same sizes of both
variants.
The incoming and outgoing feeder ends of the socket unit termination area is designed to
match the relevant 3VA molded case circuit breaker. The major benefit of this design feature
is that all terminal and connection variants of the 3VA molded case circuit breaker are fully
compatible with the corresponding plug-in or draw-out unit. To facilitate the ordering process,
the components used in combination with plug-in and draw-out units have been given
separate article numbers. Furthermore, an optional terminal cover for the molded case circuit
breaker can also be installed as a terminal cover over the plug-in socket or draw-out socket.
The connection systems available for a 3VA rated current version and the sizes of cable or
busbar cross section which are compatible with various connection types are described in
detail in chapter Connection system (Page 165).

Siemens 3VA1 100 A Specifications

General

Brand	Siemens
Model	3VA1 100 A
Category	Power Tool
Language	English