en Cleaning function
28
Setting the core temperature
Types of heating
1. Switch on the appliance.
2. Insert the meat thermometer in the socket on the left-
hand side of the cooking compartment.
3. Use the rotary selector to select the type of heating.
4. Touch the suggested temperature and set the
temperature using the rotary selector.
5. Touch the "Core temperature" field and set the core
temperature using the rotary selector.
6. If necessary, touch the "Added steam" field and set
the steam intensity using the rotary selector.
7. Press the Start/Stop button to start.
The progress line shows the core temperature as it
rises.
Steaming
1. Switch on the appliance.
2. Insert the meat thermometer in the socket on the left-
hand side of the cooking compartment.
3. Press the menu button.
4. Touch the "Steaming" field and set the type of
heating using the rotary selector.
5. Touch the "Core temperature" field and set the core
temperature using the rotary selector.
6. Press the Start/Stop button to start.
The progress line shows the core temperature as it
rises.
Dishes
1. Switch on the appliance.
2. Insert the meat thermometer in the socket on the left-
hand side of the cooking compartment.
3. Press the menu button.
4. Touch the "Dishes" field.
5. Use the rotary selector and the "Next" field to select
the required food.
6. If necessary, touch the "Adjust" filed and adjust the
settings using the rotary selector.
7. Press the Start/Stop button to start.
The progress line shows the core temperature as it
rises.
Once the set core temperature in the food has been
reached
An audible signal sounds. The oven stops heating. You
can unplug the meat thermometer from the socket. The
. symbol goes out.
Changing the core temperature
You can change the core temperature at any time.
Cancelling
Unplug the meat thermometer from the socket.
:Warning – Risk of burns!
The cooking interior and the core temperature probe
become very hot. Use oven mitts to plug and unplug the
core temperature probe.
:Warning – Risk of electric shock!
The insulation of an incompatible meat probe may be
damaged. Only use the meat probe which is
recommended for this appliance.
Core temperatures of different foods
Do not use frozen food. The figures in the table are
given as a guide. They depend on the quality and
composition of the food.
You can find comprehensive information on the heating
mode and temperature at the end of the instruction
manual. ~ "Tested for you in our cooking studio"
on page 40
.Cleaning function
Cl e a n i n g function
Your appliance has the "Cleaning function" and
"Descaling" operating modes. The self-cleaning
surfaces in the cooking compartment are cleaned with
the cleaning function. You can use the "descaling"
operating mode to remove limescale from the
evaporator.
Cleaning function
The self-cleaning surfaces (back panel, ceiling panel
and side panels) are coated with a porous, matt
ceramic material. This coating absorbs and breaks
down splashes from baking, roasting and grilling while
the oven is in operation. If the surfaces no longer clean
themselves adequately and dark patches appear, the
surfaces can be cleaned by the cleaning function.
Note: The appliance records the number of times it is
used. The appliance indicates when it has reached a
point in time after which cleaning is recommended. The
recommendation is displayed until the cleaning function
has finished.
If you do not act on this recommendation, the self-
cleaning surfaces may become damaged.
If your appliance is already prematurely very dirty or if
you notice dark patches on the back panel, do not wait
until your appliance recommends cleaning to do so.
This is because the more often the appliance is
cleaned, the longer the self-cleaning surfaces will retain
their cleaning capability. You can clean your appliance
at any time as required using the cleaning function.
Caution!
If your appliance has a steam function, the messages
recommending that you descale the appliance and that
you run the cleaning function may appear at the same
time. Follow the recommendation to descale the
appliance. The recommendation to run the cleaning
Food Core temperature in
°C
Poultry 75
Pork 75
Beef, rare 50
Beef, medium 60
Beef, well done 70
Lamb 70
Other: Heating/reheating food 65-75
To Next Page
Loading...
Need help?
General
