RUGGEDCOM RSG2100
Installation Guide
Chapter 3
Communication Ports
21
Communication Ports
The RUGGEDCOM RSG2100 can be equipped with various types of communication ports to enhance its abilities
and performance.
Module Assignment
Figure15:Module Assignment
Each type of module has a specific location in the RUGGEDCOM RSG2100 chassis:
• Slot 5 supports a pair of Gigabit Ethernet (1 Gbps) ports
• Slot 6 supports a single Gigabit Ethernet (1 Gbps) port
• All other ports support any combination of fiber or copper Ethernet connectors up to 100 Mbps
The exact configuration of the device can be determined by reading the factory data file through the ROS user
interface. For more information about how to read the factory data file, refer to the ROS User Guide for the
RUGGEDCOM RSG2100.
Port LEDs
Each communication port is equipped with an LED that indicates the link/activity state of the port.
To Next Page
Loading...
Need help?
General