Siemens RUGGEDCOM RSG2200 Installation Guide

RUGGEDCOM RSG2100
Installation Guide
Chapter 4
Technical Specifications
Copper Ethernet Port Specifications 31
Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Description
IEEE 802.1x
ü ü ü
Port-Based Network Access Control
IEEE 802.1Q-2005
(formerly 802.1s)
ü ü ü
Multiple Spanning Tree Protocol (MSTP)
Section4.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).
Connector Speed Duplex
i
Cable Type
j
Wiring
Standard
k
Maximum
Distance
l
Isolation
m
RJ45 10/100 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
RJ45 1000 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
micro-D 10/100 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
micro-D 1000 Mbps FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
i
Auto-Negotiating
j
Shielded or unshielded.
k
Auto-crossover and auto-polarity.
l
Typical distance. Dependent on the number of connectors and splices.
m
RMS 1 minute.
Section4.5
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM
RSG2100.

Siemens RUGGEDCOM RSG2200 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RSG2200
Category	Switch
Language	English