BusAdapter
Equipment Manual, 08/2020, A5E41449003-AB
55
10.1 Product overview
Article number
6ES7193-6AP40-0AA0
View
Figure 10-1 BusAdapter BA SCRJ/FC
Properties
• You connect PROFINET IO to the PROFINET device via the BusAdapter BA SCRJ/FC .
• The BusAdapter BA SCRJ/FC has one port for connection of a copper cable and one port for
connection of a fiber-optic cable.
Screw the BusAdapter BA SCRJ/FC with the attached Fast Connect bus cable onto the
interface module and plug in the SCRJ connector.
You loop through the PROFINET IO via the integrated 2-port switch. You can use any port of
the BusAdapter for feeding or for looping through. The integrated media converter converts
the signals automatically.
To Next Page
Loading...
Need help?
General
