BusAdapter
71 Equipment Manual, 08/2020, A5E41449003-AB
13.1 Product overview
Article number
6ES7193-6RA00-1AN0 (VPE: 5 strain relief units incl. screws)
View
Figure 13-1 Strain relief
Properties
• The strain relief is a mechanical protective device for the electrical PROFINET cables on the
BusAdapter.
• The strain relief is suitable for all optical and electrical PROFINET cables of the BusAdapter.
• The strain relief is an optional accessories.
• The cable ties are not included in the delivery. We recommend cable ties with a width of
4.8 mm. The maximum width is 7.0 mm. The length of the cable tie is min. 60 mm.