Siemens SIMATIC HMI KTP1000 Basic color DP User Manual

Mounting and connecting
3.3 Connecting the HMI device
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
41
3.3.4 Connecting a programming device
A programming device provides the following options:
● Transferring projects.
● Transferring device images.
Connecting a programming device to a Basic Panel DP
Note
A programming device cannot be used to reset the HMI device to factory settings.
PROFIBUS
RS 422/ 485
RS 485
PG


2))


21
1. Shut down the HMI device. Make
sure that the DIP switch on the rear
panel of the HMI device is in the
position shown.
2. Connect an RS 485 PROFIBUS
connector to the HMI device.
3. Connect an RS 485 PROFIBUS
connector to the programming
device.

Siemens SIMATIC HMI KTP1000 Basic color DP Specifications

General

Brand	Siemens
Model	SIMATIC HMI KTP1000 Basic color DP
Category	Control Panel
Language	English