Siemens SIMATIC HMI KTP1000 Basic color DP User Manual

Configuring the HMI device
5.2 Configuring KP300 Basic
Basic Panels
82 Operating Instructions, 04/2012, A5E02421799-03
Network Mode Changing the network configuration (Page 85)
LLDP Protocol
Enable
Disable
Auto Negotiation
Enable
Disable
Speed Only available if "Auto Negotiation = Enable"
10 Mbits/s
100 Mbits/s
Communication Link Only available if "Auto Negotiation = Enable"
Half-Duplex
Full-Duplex
NTP Time server configuration (Page 86)
Synchronisation with
time server
Enable
Disable
Server [1..4] IP Address Only available if "Synchronisation with time server
= Disable"
Value
Test Server [1..4] Only available if "Synchronisation with time server
= Disable"
DateTime Shows date and time of the time server after a
connection has been successfully established.
Update rate Duration in seconds according to which the time-of-
day is synchronized.
Value
Time shift Time difference in "hh:mm"
Value

Siemens SIMATIC HMI KTP1000 Basic color DP Specifications

General

Brand	Siemens
Model	SIMATIC HMI KTP1000 Basic color DP
Category	Control Panel
Language	English