Technical specifications
11.3 Standards on operating safety
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
221
WEEE label (European Union)
Disposal instructions, observe the local regulations and the section "Recycling and disposal
(Page 218)".
11.3 Standards on operating safety
Plant-related standards
The Mobile Panel and the connection box meet the following standards for use in a plant:
DIN EN
Machine Tools - Safety - Machining Centres
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards -
Immunity for industrial environments
EN 61000-6-4:2007
Electromagnetic compatibility (EMC) – Part 6-4: Generic standard -
Emission standard for industrial environments
EN 61131-2:2007 The HMI device meets the requirements and criteria according to
IEC 61131-2, Programmable Controllers,
Part 2: Equipment requirements and testing
TÜV
The TÜV confirms that the Mobile Panel and the connection box satisfy the requirements of
the following standards with regard to their safety functions:
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – Part 1:
DIN IEC 62061:2005
Safety of machinery – Functional safety of electrical, electronic and
programmable control systems for machinery
Safety of machinery - EMERGENCY STOP - Principles for design
Performance Level e and Category 4
11.4 Electromagnetic compatibility
The Mobile Panel and connection box satisfy the requirements of the German EMC Act
relating to the European internal market.
EMC-compliant installation
EMC-compliant use of the Mobile Panel and connection box and the use of interference-
proof cables are prerequisites for error-free operation.