Siemens SIMATIC IPC427C User Manual

Expansions and Configurations
10.3 Installing PCI-104 / PC/104 Plus modules
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
59
10.3 Installing PCI-104 / PC/104 Plus modules
10.3.1 Notes on the modules
Notes on module specifications
The device is designed for use with modules conforming to specifications of the PC/104
Consortium.
● PCI-104 modules: PCI compatible (120-pin plug)
● PC/104
Plus modules that use only the 120-pin plug (PCI bus)
Note
The necessary expansion frames for mounting these modules can be ordered as a six-
pack with order number 6AG4070-0BA00-0XA0 via the A&D online ordering system
(http://www.siemens.com/automation/mall
).
NOTICE
When expanding the device with PCI-104 / PC/104 Plus modules, adhere to the safety
and mounting regulations for the expansion modules.
The device may be mounted in an enclosure that meets the requirements of Sections
4.6 and 4.7.3 of IEC/UL/EN/DINEN60950-1.

Siemens SIMATIC IPC427C Specifications

General

Brand	Siemens
Model	SIMATIC IPC427C
Category	Industrial PC
Language	English