Commissioning
6.3 Reinstalling the software
SIMATIC IPC647C
Getting Started, 12/2010, A5E02669344-02
29
6.3 Reinstalling the software
If your software is corrupt, you can reinstall it using the recovery CD or DVD, the
Documentation and Drivers CD and the Restore DVD.
Recovery CD or DVD:
The recovery CD/DVD contains the Windows user interface with tools for configuring the
hard drives, and for installation of the operating system and the languages supported by the
operating system (MUI).
The base language of the operating system to be installed is English. If you want to integrate
additional languages, you will need to retro-install them from Recovery CD or DVD.
Documentation and Drivers CD:
Contains the documentation and the hardware drivers.
Restore DVD:
● Contains a hard disk image file with the original software (operating system with installed
hardware drivers).
To restore the delivery state:
● Place the Restore DVD into the drive and restart the device using the on/off switch.
● When BIOS outputs the message
Press <F2> to enter SETUP or <F12> to display the boot menu.
appears, press the F12 key. After initialization, a "Boot Menu" is displayed.
● Select the optical drive using the cursor keys.
● Now follow the instructions on the screen.
CAUTION
All existing data, programs, user settings and authorizations or license keys will be
deleted from the hard disk and are therefore lost.
For information on the functions, refer to the README.TXT file on the Restore DVD.
To Next Page
Loading...
Need help?
General
