Preparing for use
4.4 Delivery
1MB..1/2/3/4 - shaft heights 63 ... 355
34 Operating Instructions, 06/2020, A5E44455710A
4.4 Delivery
Checking the delivery for completeness
The drive systems are put together on an individual basis. When you take receipt of the
delivery, please check immediately whether the items delivered are in accordance with the
accompanying documents. Siemens will not accept any claims relating to items missing from
the delivery and which are submitted at a later date.
● Report any apparent transport damage to the delivery agent immediately.
● Report any apparent defects/missing components to the appropriate Siemens office
immediately.
● Put the operating instructions included in the scope of supply in a secure place.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable
the motor data to be attached on or near the machine or installation.
4.5 Transport and storage
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 11).
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid
down in EN 50110-1 regarding safe operation of electrical equipment.
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
● Machine dimension drawing and the associated explanations or the technical data
● Transport data
● Rating plate and lifting plate, if available
● Shipping parts list
● Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
● All work must be performed with due caution and care.
● Comply with any notes in the shipping papers.
● Carefully comply with all of the handling information and markings on the packages
whenever transporting and putting the equipment into storage according to ISO 780.
● Only use suitable and adequately dimensioned lifting equipment, transport equipment
and industrial trucks.
To Next Page
Loading...
Need help?
General