Siemens SINUMERIK 802C Diagnostics Guide

1 Alarms 01.02
6FC5598-3AA20-0BP2 © Siemens AG 2002 All Rights Reserved
1-10 SINUMERIK 802S/802C (DG)
1.1 Overview of NCK Alarms
System error %1
%1 = System error number
This alarm refers you to internal error conditions, which in conjunction with
the error number contained in the error message provide information on the
error cause and the error location.
Alarm display.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the Clear key to clear the alarm. No further operation required.
Alarm pointer for this self-clearing alarm %1 is zero
%1 = Alarm number
The address used by the operating system for self-clearing alarms (zero
pointer) is not permitted for use in the system.
Alarm display.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Press the Clear key to clear the alarm. No further operation required.
Alarm reaction from nck alarm is false projected
%1 = incorrect alarm number
The alarm response configured by the operating system is incorrect.
Alarm display
Interface signals are set
NC not ready for operation.
Please contact the hotline indicated in the beginning of this Manual and specify
the operating system error number.
Power ON
Operating system error %1
%1 = Operating system error
This alarm indicates that the operating system has detected a severe error in the
system.
Alarm display.
Interface signals are set.
NC not ready for operation.
1 002
Explanation
Response
Remedy
Program continua-
tion by
1 003
Explanation
Response
Remedy
Program continua-
tion by
1 004
Explanation
Response
Remedy
Program continua-
tion by
1 005
Explanation
Response

Siemens SINUMERIK 802C Specifications

General

Brand	Siemens
Model	SINUMERIK 802C
Category	Control Systems
Language	English