Technical Data
11.1 General Device Data 1105
11.2 Protection Interface and Protection Topology 1114
11.3 Date and Time Synchronization 1116
11.4 Automatic Reclosing 1117
11.5 Phasor Measurement Unit 1118
11.6 Circuit-Breaker Wear Monitoring 1119
11.7 External Trip Initiation 1120
11.8 Overcurrent Protection, Phases 1121
11.9 Overcurrent Protection, Ground 1133
11.10 Directional Overcurrent Protection, Phases 1143
11.11 Directional Overcurrent Protection, Ground 1149
11.12 Inrush-Current Detection 1159
11.13 Instantaneous High-Current Tripping 1160
11.14 Stage with Definite-Time Characteristic Curve 1161
11.15 Stage with Inverse-Time Characteristic Curve 1163
11.16 Voltage-Dependent Overcurrent Protection, Phases 1165
11.17 Overvoltage Protection with 3-Phase Voltage 1168
11.18 Overvoltage Protection with Positive-Sequence Voltage 1170
11.19 Overvoltage Protection with Any Voltage 1171
11.20 Undervoltage Protection with 3-Phase Voltage 1173
11.21 Undervoltage Protection with Any Voltage 1176
11.22 Overfrequency Protection 1177
11.23 Underfrequency Protection 1178
11.24 Underfrequency Load Shedding 1179
11.25 Rate of Frequency Change Protection 1181
11.26 Power Protection (P,Q), 3-Phase 1183
11.27 Instantaneous Tripping at Switch onto Fault 1184
11.28 Circuit-Breaker Failure Protection 1185
11.29 Negative-Sequence Protection with Definite-Time Characteristic Curve 1187
11.30 Stage with Inverse-Time Characteristic Curve 1188
11.31 Thermal Overload Protection, 3-Phase – Advanced 1190
11.32 Thermal Overload Protection, 1-Phase 1194
11.33 Temperature Supervision 1197
11.34 Analog-Units Function Group 1198
11
SIPROTEC 5, High-Voltage Bay Controller, Manual 1103
C53000-G5040-C015-A, Edition 05.2018
To Next Page
Loading...
Need help?
General
