8
TUTORBIT
COSMOGAS
4 - INSTALLATION
4.1 - TutorBit electrical connections
The TutorBit controller is a system manager able to control:
- until 4 heater modules;
- two heating zones;
- a DHW zone controlled by a temperature sensor (or
alternatively by an ON / OFF thermostat);
- a DHW return zone;
- an alarm output;
- on outdoor sensor;
Figura 4-1 - TutorBit electrical connections
- a DHW enable / disable input;
- Modbus communication to the MYDENS T or AGUADENS
T models heat generators;
- Ethernet communication to PC (WEB Server connection)
and / or communication toward an Internet Cloud;
- KNX communication for room sensor QMX3;
- connection to a remote control POL895;
- until 3 POL 945 expansions (see Section 4.2);
- one POL 955 expansion (see Section 4.3).
In Figure 4-2 you can see the detail of the electrical
connections and in Section 4.21 you can consult some of the
most common systems diagrams.
TutorBit can be installed on a DIN rail and is supplied with
terminals for electrical connections.
To Next Page
Loading...
Need help?
General
