65
TUTORBIT
COSMOGAS
BSP light Meaning BUS light Meaning
Flashing red Software error Red Communication error
Green In operation Green Correct communication
Yellow Communication correct but parameters not
fully congured
5.1.2 - Expansion BSP and BUS lights
The expansion has two lights, BSP and BUS (see Figure 3-2
and 3-3), the state of which indicates device operation. The
diagnostics can be checked in the table below.
BSP light Meaning BUS light Meaning
Red and yellow alternating
every second
Software update Off Modem not connected
Green In operation Yellow Modem connected and initialised but
communication is missing
Yellow Programme loaded but not working Green Modem connected and communication
active
Flashing yellow Programme not loaded Red Modem connected but there is a
communication error (for example, the
provider has disappeared)
Flashing red Software error Flashing red Software or hardware error
Steady red on Hardware error
5.1.1 - BSP and BUS lights on Tutorbit
Tutorbit has two lights, BSP and BUS (see Figure 3-1), the
state of which indicates device operation. The diagnostics can
be checked in the table below.
5 - ALARMS AND DIAGNOSTICS
A040 Gener. 3 Burner 3 Module 3 error alarm; Check the type of error on the generator
3 display;
Restore by following the
instructions provided with
the generator;
A041 Gener. 3 Burner 4 Module 3 error alarm; Check the type of error on the generator
3 display;
Restore by following the
instructions provided with
the generator;
A042 Gener. 4 Burner 1 Module 4 error alarm; Check the type of error on the generator
4 display;
Restore by following the
instructions provided with
the generator;
A043 Gener. 4 Burner 2 Module 4 error alarm; Check the type of error on the generator
4 display;
Restore by following the
instructions provided with
the generator;
A044 Gener. 4 Burner 3 Module 4 error alarm; Check the type of error on the generator
4 display;
Restore by following the
instructions provided with
the generator;
A045 Gener. 4 Burner 4 Module 4 error alarm; Check the type of error on the generator
4 display;
Restore by following the
instructions provided with
the generator;
A046 Gen. 1 Modbus Commun. : Faulty Module 1 communication error
Check the connection with the generator;
Restore the connection;
A047 Gen. 2 Modbus Commun. : Faulty Module 1 communication error
Check the connection with the generator;
Restore the connection;
A048 Gen. 3 Modbus Commun. : Faulty Module 1 communication error
Check the connection with the generator;
Restore the connection;
A049 Gen. 4 Modbus Commun. : Faulty Module 1 communication error
Check the connection with the generator;
Restore the connection;
To Next Page
Loading...
Need help?
General
