Silvercrest SDB 2400 F4 User Manual

SDB 2400 F4
GB
│
MT
│
37 ■
Ironing with steam blast
■ The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
HINWEIS
► The temperature control 8 must be turned to at least the setting range
.
Otherwise no steam will be produced.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
4. You can also use the
steam blast function to smooth hanging textiles.
3)
Hold the iron vertically and press the steam blast button
4.
Pausing operation of the steam iron
WARNING – RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply.
1) Move the temperature control 8 to the "MIN" position.
2) Stand the steam iron only on the base 0.
After use
■ Remove the plug from the mains power socket.
■ Empty the water tank and clean the sole of the iron q.
■ Place the cooled-down steam iron on the base 0.
Drip-stop function
With conventional steam irons, water can drip from the sole of the iron q at
low temperatures. This iron however, possesses a new feature, the DRIP-STOP
function. At low temperatures, the iron automatically switches off the steam-
blast function. When this happens, you will hear a "CLICK". Then set a suitable
temperature with the temperature control 8. As soon as this is reached, steam
production is resumed.

Silvercrest SDB 2400 F4 Specifications

General

Brand	Silvercrest
Model	SDB 2400 F4
Category	Iron
Language	English