EasyManuals Logo

Silvercrest SKMD 1000 A1 User Manual

Silvercrest SKMD 1000 A1
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
25
GB
8. Allow approximately half of the descal-
ing agent to run through the machine,
and then switch off the device by press-
ing |18.
9. Leave the descaling agent to work for
approx. 30 minutes.
10.Switch the coffee machine|6 on by
pressing |18 and allow the rest of the
descaling agent to run through.
11.The red LED|19 goes off approx.
5 – 6|minutes after the end of the brew-
ing process.
12.Empty the thermal jug|8 and rinse it out
with water.
13.Fill the water tank|4 with clear water
twice more up to the 8 cup marking
and start the brewing process.
9. Storage
DANGER for children!
~ Keep the device out of the reach of chil-
dren.
1. Clean the coffee machine|6 and rinse
out the thermal jug|8.
2. Leave the cleaned coffee machine|
6
and
the cleaned accessories to dry before you
assemble them and put them away.
10. Disposal
T
his product is subject to the
provisions of European Di-
rective 2012/19/EC.
The
symbol showing a wheelie
bin crossed through indicates
that the product requires sep-
arate refuse collection in the European Union.
This applies to the product and all accessories
marked with this symbol. Products identified
with this symbol may not be discarded with
normal household waste, but must be taken to
a collection point for recycling electric and
electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling.
Recycling helps to reduce
the consumption of raw materi-
als and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
11. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~ Do not attempt to repair the device your-
self under any circumstances.
Fault
Possible causes /
Action
No function
Has the device been
connected to the pow-
er supply?
Check the connection.
The quality of
the coffee
brewed is be-
coming worse.
The coffee machine|6
needs to be descaled.
The boiling
process takes
longer for the
same volume.
The lid|1 of the
coffee machine
does not close
properly.
Is the filter holder|11
correctly inserted into
the coffee machine|6?

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SKMD 1000 A1 and is the answer not in the manual?

Silvercrest SKMD 1000 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSKMD 1000 A1
CategoryCoffee Maker
LanguageEnglish

Related product manuals