■ 8
│
GB
│
CY
SLR 30 A1
How the appliance works
Inside the air purifier, there is a fan (ventilator) which draws the air in the room
into the appliance and then through a high-quality filter.
The filter cleans the air of particles such as house dust,
pollen, fungal spores, smoke etc., so that the amount of these
particles in the air is reduced. In addition, the activated
carbon filter contained in the filter ensures that odours in
the air are neutralised or reduced
.
The appliance has a timer function for automatic switch-off
and a sleep mode for silent fan operation during the night.
The additional ion function allows efficient removal of dirt particles in the air, thus
improving indoor air quality
.
Ion function
The ion function is used to electrically charge (ionise) particles (atoms or mole-
cules) contained in the air in the air purifier. These ions are then released into the
room air via the fan. As a result, airborne ions and particles with different charges
stick together. These particles sink more easily and can therefore no longer float
around in the room air.
Air quality indicator (illuminated ring)
There is an illuminated ring w on the appliance's control panel 1, which uses
different colours to indicate the amount of dirt particles in the room air.
Depending on the quality of the room air, the illuminated ring
w lights up in one
of the following colours:
Illuminated ring colour Air quality
Blue Good
Yellow Medium
Red Poor
To Next Page
Loading...
Need help?
General
