Sinee A90-4T5R6B User Manual

User Manual of A90 Series Inverter
245
terminal status
0: Invalid
1: valid
00000
F17.38
Virtual output
terminal status
VY8
VY7
VY6
VY5
VY4
VY3
VY2
VY1
000
00000
×
0: Invalid
1: valid
The real-time status of the current virtual terminal is displayed.
7.18 Monitoring Parameter Group of F18 Group
This group of parameters is used only to view the current status of the inverter and
cannot be changed.
Function
code
Function code
name
Parameter description
Unit
F18.00
Output frequency
Display the current output frequency of the inverter.
Scope: 0.00 to upper frequency limit.
★
: This parameter will be updated promptly in the speed
control mode.
Hz
F18.01
Set frequency
Display the current set frequency of the inverter. Scope:
0.00 to maximum frequency F00.16.
★
: This parameter will be updated promptly in the speed
control mode.
Hz
F18.02
Reserved
F18.03
Estimate
feedback
frequency
Display the estimated feedback frequency in the SVC
control mode. Scope: 0.00 to upper frequency limit.
★
: This parameter will be updated promptly in the SVC
control mode.
Hz
F18.04
Output torque
Display the current output torque of the inverter. Scope:
-200.0 - 200.0.
%
F18.05
Torque setting
Display the current set torque of the inverter. Scope:
-200.0 - 200.0.
★
: This parameter will be updated promptly in the torque
control mode.
%
F18.06
Output current
Display the current output current of the inverter.
Depending on the rated power level of the motor, the
range is as follows:
0.00 to 650.00 (rated power of motor: ≤ 75 kW)
0.0 to 6500.0 (rated power of motor: > 75 kW)
A
F18.07
Output current
percentage
Display the current output current as a percentage
(relative to the rated current of the inverter). Range: 0.0
to 300.0.
%
F18.08
Output voltage
Display the current output voltage of the inverter. Scope:
0.0 - 690.0.
V

Sinee A90-4T5R6B Specifications

General

Brand	Sinee
Model	A90-4T5R6B
Category	Inverter
Language	English