Singer 141G-20CE User Manual

3.3
Lubrication
Before turning the machine on,
fill oil reservoir ‘1’ with sewing
machine oil up to ‘HIGH’ mark ‘A’
(Figure 6).
When the oil level lowers below
‘LOW’ mark ‘B’, refill the oil reser-
voir with the specified oil.
When you operate the machine af-
ter lubrication, you will see splash-
ing oil through oil sight window ‘2’
if the lubrication is adequate.
Note that the amount of the splash-
ing oil is unrelated to the amount
of the lubricating oil.
Precaution
Figure 6
HIGH
LOW
2
1
B
A
When set-up a new
machine or a machine
after an extended
period of disuse, run
your machine at
3,000 - 3,500 rpm
for about 10 minutes
for the purpose
of break-in.
7
|
Instruction Manual and Parts List
Integrated Energy Saving Direct Drive Motor Lockstitch Sewing Machine

Singer 141G-20CE Specifications

General

Brand	Singer
Model	141G-20CE
Category	Sewing Machine
Language	English