10
ELECTRICAL CONNECTION
1. Place machine on stable surface.
2. Connect the power line cord to the machine by inserting
the 2-hole plug into the power cord connector.
3. Connect the power line plug to the electric outlet.
4. Turn on the power switch.
5. The LED lights will light up when the switch is turned on
(symbol I).
6. To disconnect, turn the power switch to the off position
(symbol O), then remove plug from outlet.
FOR UNITED STATES AND CANADA USERS:
POLARIZED PLUG INFORMATION
This sewing machine has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this plug
is intended to t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does not
t, contact a qualied electrician to install the proper outlet. Do
not modify the plug in any way.
SettingUptheMachine
FOOT CONTROL
Use only foot control provided with this machine. (type
C-9001 manufactured by CHIEN HUNG TAIWAN Ltd)
The foot control is operated by your foot. The foot control
permits the starting and stopping of the machine, as well as
sewing speed.
1. Turn off the power switch. (symbol O)
2. Push foot control plug into the connector on machine.
3. Place foot control at your feet.
4. Turn on the power switch.
UNPACKING
1. Place the box on a steady, at surface. Lift your machine
out of the box and remove the outer packaging.
2. Remove all other packing material and the plastic bag.
To Next Page
Loading...
