Singer CLASS 99 User Manual

Class 99 & 99K
To Regulate Length of Stitch
The machine is adjustable to make
from 6 to 30 stitches per inch, as
indicated by the numerals on the stitch
indicator plate.
The "red dot" indicator U, Fig. 24, in the
slot at the left indicates the stitch
setting. To regulate the length of stitch,
turn thumb nut V, Fig. 24, on lever
away from the stitch indicator plate as
far as necessary. Move the lever at V
until the "red dot" indicator U is at the
desired stitch setting. Then turn thumb
nut V inward until it touches indicator
plate. The machine is not set to stitch
the desired number of stitches per inch
in a forward direction.
To Reverse the Direction of Feed
For Back Tacking, raise the lever to the
upper end of the indicator plate. The
machine will then stitch in a reverse
direction, making it easy to fasten the
ends of seams.
Page 21
Table of Contents | Previous Page | Next Page

Singer CLASS 99 Specifications

General

Brand	Singer
Model	CLASS 99
Category	Sewing Machine
Language	English