Class 99 & 99K
THE ZIPPER FOOT
The zipper foot is designed for accurate
placement of stitches close to a raised
edge. The hinged feature of this foot
insures even feeding over pins, heavy
layers of fabric or cross seams. It is
attached to the machine in place of the
presser foot, and may be adjusted to
either side of the needle.
Applications
The Zipper Foot
Zipper insertions
Corded seams
Tubular cording
Slip cover welting
Preparation
Attach zipper foot to machine in place of presser foot.
●
Loosen zipper foot thumb screw and adjust foot to right or left of needle, as
desired.
●
Align the notch in the toe with the needle hole in the throat plate.●
Check adjustment by lowering needle into side notch, making sure it clears
the foot.
●
Lock foot in position by tightening thumb screw.●
Page 44
Table of Contents | Previous Page | Next Page
To Next Page
Loading...
Need help?
General
