Singer CLASS 99 User Manual

Class 99 & 99K
If the Machine is Hand Operated
When the machine is uncovered, the
hand attachment will be found to be out
of working position as shown in Fig. 6.
Pull the small spring stud 2, and turn
the handle back until leer 1, enters the
socket 3. Press back the hinged finger
4, Fig. 7 between the spokes of the
wheel. The machine is now ready for
working as shown in Fig. 7.
NOTE. Before replacing the cover on
the machine in its case, the lever
should be disengaged and the handle
placed in the position shown in Fig. 6.
To Operate the Hand Machine
Place a piece of material under the presser foot Q, Fig. 5, and lower the latter by
means of the lifter R. Now turn the handle over from you to work the machine,
without being threaded, until you are accustomed to guiding the material with the
left hand.
Page 6
Table of Contents | Previous Page | Next Page

Singer CLASS 99 Specifications

General

Brand	Singer
Model	CLASS 99
Category	Sewing Machine
Language	English